Surface coatings are thin layers of protective materials applied onto the surface of a substrate to enhance its properties and performance. These coatings are used in various materials such as stainless steel, aluminium, and plastic to improve their corrosion resistance, wear resistance, chemical resistance, and aesthetic appeal. In the blog post, we will explore the basics of surface coatings and introduce two popular methods: electroplating and physical vapor deposition (PVD).

Table of Contents

What Is Electroplating

Electroplating is a process where a metal coating is deposited onto a conductive surface using an electric current. The substrate acts as the cathode, while the anode is made of the plating material. The metal ions from the anode are attracted to and deposited onto the substrate surface through electrolysis.

1. Cost-effective
2. Versatility
3. Durability
4. Corrosion protection
5. Customized finishes

1. Limited coating thickness
2. Environmental concerns
3. Uneven coating distribution
4. Limited to conductive materials

This technique has been used for over 200 years and remains one of the most commonly used methods for surface coating. It offers several advantages, such as cost-effectiveness, versatility in coating different substrates with various metals, and precise control over thickness.

What Is PVD

Physical Vapor Deposition (PVD) is a vacuum-based process where a thin film of material is deposited onto a substrate by evaporating it from a solid source. The vaporized atoms travel through a vacuum chamber before condensing on the substrate’s surface to form a thin film.

1. Durability
2. Aesthetic Appeal
3. Uniformity
4. Environmentally Friendly
5. Versatility

1. High Cost
2. Limited Thickness
3. Limited Substrate Compatibility
4. Surface Preparation Requirements
5. Coating Uniformity Challenges

There are different methods of PVD coating, including sputtering and evaporation. Sputtering involves bombarding a target material with high-energy ions to release atoms that deposit onto the substrate. On the other hand, evaporation involves heating the source material until it evaporates and then condensing on the substrate. PVD is commonly used for decorative coatings, wear-resistant coatings, and thin films for electronic devices.

pvd vs electroplating

Key Differences Between Electroplating and PVD

While both electroplating and PVD are used for surface coatings, they differ in process and application. So, what are the differences between them?

In the Term of Process

The main difference between these two techniques is how the coating material is deposited onto the substrate. Electroplating uses an electric current to deposit metal ions onto a conductive surface, while PVD relies on vaporized atoms that travel through a vacuum chamber before condensing onto the substrate. This fundamental difference results in cost, adhesion, and coating properties variations.

- Process of Electroplating

Electroplating is a common process used in surface coatings to enhance various objects’ appearance, durability, and functionality. The process of electroplating includes 8 steps:

1.Preparation. The first step in electroplating is preparing the object to be plated. This involves cleaning and polishing the surface to remove any dirt, oils or other contaminants that may interfere with the plating Process.
2. Degreasing. The object is degreased using chemical solvents or alkaline cleaners to ensure no remaining oils or greases on its surface.
3. Etching. In some cases, etching may be necessary to create a rougher surface for better adhesion of the plating metal.
4. Pre-treatment. Before being placed into the plating solution, some materials require pre-treatment steps such as activation (to improve adhesion) or strike coating (to provide a base layer).
5. Plating bath. The object is then immersed into an electrolyte solution containing dissolved metal ions (such as copper, nickel, chrome) and other chemicals that facilitate proper conductivity and control of current flow.
6. Electricity. Once submerged in the plating bath, an electric current is passed through the solution, causing the metal ions to be attracted to and deposited on the object’s surface.
7. Rinse. After plating, the object is removed from the bath and rinsed with water to remove any excess plating solution.
8. Drying. The final step involves drying the plated object using air or heat.


- Process of PVD Coating

PVD (Physical Vapor Deposition) coating is a surface treatment process that involves the deposition of thin layers of material onto a substrate through physical vaporization and condensation. Unlike traditional electroplating, PVD coating takes only 6 steps to complete:

1. Prepare. The PVD coating process starts with preparing the substrate, which includes thorough cleaning and polishing to ensure proper adhesion. The substrate is then placed into a vacuum chamberr.
2. Physical vaporization. In this step, a high-energy beam such as an electron beam or plasma arc bombards the source material (usually in solid form) until it vaporizes and becomes ionized gas or plasma.
3. Ionization. The ions are then accelerated towards the substrate at high speeds through an electric field, creating a directional flux that deposits them onto the surface.
4. Condensation. Upon reaching the more relaxed substrate, these ions condense and bond to form a thin film layer.
5. Nucleation and growth. As more and more ions deposit on top of each other, they start to nucleate and grow until they form a uniform coating layer.
6. Post-treatment. After deposition, some PVD coatings may undergo additional treatments, such as annealing or nitriding, to improve their properties further.

sandblasted stainless steel sheet

In the Terms of Types

Electroplating is limited to conductive surfaces only, while PVD can be applied to conductive and non-conductive substrates. Also, electroplated coatings tend to be thicker, while PVD coatings are typically thinner and have a more uniform thickness.

Surface coatings play a crucial role in enhancing the performance and aesthetics of various products. Whether you need a cost-effective layer with precise control over thickness or a thin film with excellent adhesion, a surface coating technique can meet your needs.

- Types of Electroplating

There are several types of electroplating, and the specific method used depends on the metal being plated, the substrate material, and the desired result. Some common types of electroplating include:

1. Nickel Plating

This is one of the most widely used types of electroplating. It involves depositing a nickel layer onto a metal or plastic substrate to improve its corrosion resistance, wear resistance, and appearance.

2. Gold Plating

Gold plating deposits a thin layer of gold onto a conductive surface for decorative or functional purposes. It is commonly used in jewellery making and electronic components.

3. Copper Plating

Copper plating is often used as an undercoat for other metals due to its high conductivity and good adhesion properties. It can also be used for decorative purposes.

4. Silver Plating

Similar to gold plating, silver plating involves depositing a layer of silver onto a surface for decorative or functional purposes. It is commonly used in tableware, jewellery, and electrical components.

Electroplating is a widely used technique for coating a surface with a thin metal layer. This process can improve the coated object’s appearance, durability, and functionality and is used in various industries such as automotive, aerospace, electronics, etc.

colored stainless steel sculpture design

- Types of PVD Coating

There are several types of PVD coating methods, each with specific uses and advantages. Some standard PVD coating techniques include:

1. Physical Vapor Deposition (PVD)

The general term used to describe the entire process of vaporizing and condensing ions onto a substrate.

2. Sputtering

This method uses energetic gas ions to dislodge atoms from a target material, which then deposit onto the substrate.

3. Evaporation

In this technique, a source material is heated until it evaporates, forming a vapor that deposits onto the substrate.

4. Cathodic Arc Deposition

This method involves using high-energy electric arcs to vaporize a target material, which then deposits onto the substrate.

pvd coating

Other Differences between Electroplating and PVD

Electroplating and Physical Vapor Deposition (PVD) are commonly used for surface coatings in various industries. While these two methods may achieve similar results, critical differences between electroplating and PVD make each process unique.

1. Coating Thickness

Another critical difference between electroplating and PVD is the thickness of the deposited coating. In electroplating, the thickness of the layer can vary depending on factors such as current density, plating time, and bath composition. Generally, electroplated layers are relatively thicker than PVD coatings, ranging from 0.1 to 100 microns thick.

On the other hand, PVD coatings are much thinner and typically range from 0.01 to 5 microns thick. This allows for better control over coating thickness in PVD as it depends on factors like temperature and pressure of the coating material, making it a more precise process.

2. Material Compatibility

Electroplating and PVD also differ in terms of material compatibility. Electroplating is usually limited to conductive materials, as the process relies on passing an electric current through the deposition solution. Therefore, only metallic substrates can be electroplated.

In contrast, PVD can deposit coatings onto conductive and non-conductive materials due to its physical nature of vapour deposition. This makes PVD more versatile for a broader range of substrates, including plastics and ceramics.

One World Trade Center Lobby - new

3. Coating Properties

The properties of the deposited coating also differ between electroplating and PVD methods. Electroplated layers are typically porous and have a less uniform structure than PVD coatings, which are denser and more uniform. This results in PVD coatings having better corrosion resistance and hardness than electroplated coatings.

Additionally, electroplated coatings may contain impurities from the plating bath, while PVD coatings are pure since they are evaporated from a solid source material.

4. Cost and Efficiency

Cost and efficiency are also significant differences between electroplating and PVD processes. Electroplating is generally more cost-effective and widely available, making it a popular choice for high-volume production. However, it can be a slower process and may require multiple steps for preparation and post-treatment.

PVD, on the other hand, is generally more expensive due to the equipment required for the vacuum deposition process. However, it is faster and more efficient than electroplating, making it a preferred option for smaller batch sizes or when precise control over coating properties is necessary.

Choosing the Right Coating for Your Needs

Choosing the suitable coating for your needs is essential in ensuring your materials’ best performance and longevity. With various surface coatings available, determining which suits your specific requirements can be overwhelming. This section will discuss some key factors to consider when choosing between electroplating and PVD coatings.

1. Purpose of the Coating

The first step in selecting a coating is to understand the purpose or function it will serve. Electroplating, or electrodeposition, involves using an electric current to deposit a thin metal layer onto a base material. This process provides added protection against corrosion, wear, and tear and enhances the appearance of the material.

On the other hand, PVD (Physical Vapor Deposition) uses a vacuum chamber to deposit a thin material layer onto a substrate through vaporization or sputtering techniques. This type of coating is ideal for providing wear resistance, thermal stability, and improved hardness on surfaces.

2. Material Compatibility

Another crucial factor to consider is the compatibility of the coating with your base material. Electroplating can be applied on various conductive materials such as steel, copper, and brass, while non-conductive materials like plastic require unique pre-treatment processes before plating.

PVD coatings have better compatibility with non-conductive materials, making them suitable for plastics and ceramics without prior treatment.

pvd vs electroplating

3. Environment and Exposure Conditions

The environment in which your coated material will be used is essential in determining which coating suits your needs.

Electroplated surfaces are suitable for mild temperatures and low-corrosive environments. They act as a barrier against corrosion and wear and tear and improve the appearance of the material.

On the other hand, PVD coatings are more resistant to heat and chemical exposure, making them ideal for use in harsh environments such as high temperatures, corrosive chemicals, and heavy wear applications.

4. Aesthetics

Electroplating may be better if aesthetics are essential to your project or product design. Electroplating offers a wide range of finishes, such as shiny chrome, gold or silver plating, which can enhance the appearance of your materials.

PVD coatings provide a functional but aesthetic finish that doesn’t compromise performance. They offer a variety of colours, including black, gold or bronze, while retaining their available properties.

5. Cost Considerations

Cost is an essential factor when choosing between electroplating and PVD coatings. Electroplating costs depend mainly on the type of metal used in the process; precious metals like gold and silver are more expensive. PVD coatings require specialized equipment, which can increase the overall cost but may be more cost-effective for larger production runs.

6. Maintenance and Durability

Before selecting a coating, consider your materials’ maintenance and durability requirements. Electroplated surfaces may require regular polishing or cleaning to maintain their appearance, while PVD coatings are more resistant to wear and tear, reducing the need for frequent touch-ups.

In conclusion, electroplating and PVD coatings have unique advantages and applications. The choice between the two ultimately depends on your needs, budget, and environment. It is essential to consult with a reputable coating service provider to determine which option is best suited for your project or product.

Leave A Comment

Contact Us

Have a complex project? Or have a question? Get in touch with us using the form below.